Category Archives: Travel

Heading South looking for Sun

Now that we have our paperwork in order and time on our hands it is time to find the captain some warm water again.

Pointing south again we head back to our friends at Marina Coral to clear back into Mexico using our new hard earned TIP (Temporary Import Permit). We will spend a couple days in Ensenada and then head to La Paz with a couple stops on the way.

Emmy and Cam have never done an overnight so we will have to work out procedures and watch lists. I think we will start with them working together and me alone. Once they are a little more comfortable we can start more standard watches.

Upon our return, we met two delivery captains bringing a 58′ Solaris (I think) sailboat made in Italy. It was a gorgeous blue hull with carbon rig. I can’t believe I didn’t take a picture! We spent the day swapping stories and lying about how cool we were. Normal captain stuff.  They are from Charleston South Carolina and really fun and knowledgable.  Alex and Dan. Dan calls himself jokingly the worlds greatest sailor. He has more than 200,000 miles delivering  boats all over the world. What fun!

San Diego USA

Will taking a turn at the helm on the way from Ensenada to San Diego.


Roxia made it back to the USA for the first time since 2011.  We were able to find a good slip location thanks to John Russell on NordSail One at Point Loma Marina. We learned we would have to leave Mexico because of the existing TIP’s in my last post about a week before Yacht Express arrived. I decided that since we had to be in San Diego I would purchase 12 new Lifeline Batteries at my supplier in Seattle and drive my truck down south.  Because I was driving anyway, we totally loaded my truck with all the gear from our previous boat stashed in my garage. I left my truck at my brother’s house near Dana Point and Devin drove me down to San Diego airport to pick up the Admiral (Emmy), my son Will and nephew Cameron. Going way beyond the salesman relationship Devin drove us to Ensenada to meet Roxia.  We could not take my truck into Mexico or we would have to pay duty on all the batteries.

Now that we were in San Diego we (mostly Will and Cameron) unloaded 2,000 pounds of batteries (old) off and 2,000 pounds of batteries (new) back on Roxia.  I spent most of the time in the battery bay up front cleaning and rewiring everything.  With everything out I could scrub the bilge then apply dielectric grease on all the connections. I hope I don’t have to do this again. The three of us couldn’t move the next day.

I made a wood lever to help move my through hulls and it also worked perfect to tighten the wing nuts on the battery hold downs.

With the tanks now full of water and fuel our waterline is down to the anti-foul. This is almost 8″ lower than when everything was close to empty for transport.


Being in San Diego was also fun because Will had friends from California visit and a friend visiting from Seattle, Mari Rossi also stopped by with friends. Will had to leave back for graduate school and all the visitors left so we are down to three. We used LimeBike electric bikes to tour San Diego and pick up last minute supplies.

Ensenada, Mexico

We had an amazing experience with the “sinking” (on purpose) ship DYT Yacht Express. After the great load process onto the ship in Brisbane we headed to Ensenada for the offload only one month later.  Not only was the shipment quicker than we could have done driving Roxia it was a little less expensive.  The big negative is you don’t have the experience of crossing the ocean or visiting the remote islands of the South Pacific. I think given the choices for us this was the right decision. We will spend time on the west coast from Mexico to Canada and be able to visit friends and family along the way.

This picture was taken in Papeete Tahiti while Yacht Express was making a stop on the way to Ensenada.


You can see Roxia on the Port side behind a 150′ vessel.

These pictures show the process to re-float the boats prior to driving off.

When we arrived in Mexico we found that two previous owners of Roxia had active Temporary Import Permits (TIP). You cannot obtain a new TIP with an existing one so the customs officials did not know how this could happen.  Because we could not be in Mexico on another persons permit, the only remedy was to apply for exit papers which proves we were leaving Mexico. At that point we were able reprint the newest active TIP first then cancel  the TIP. Then we started over with the second permit.  Because it is “not possible” to have two active TIPs in the system we spent a great deal of time in the customs office. With exit papers in-hand, two canceled TIPs we were able to obtain a new TIP under our name. However, because we had exit papers we had to leave Mexico and clear back into the USA. Fito and Juan at Marina Coral were invaluable in helping us through the process all for $60 US!

While waiting between customs office visits we met through a mutual friend Tomas Fernandez.  Tomas with his two sons Tomas and Diego own and operate two shipyards in Ensenada. Baja Naval is for vessels under 85 feet or 75 tons and Gran Peninsula is for larger vessels up to 200′. Tomas (Sr.) and Rocio own N6219 Alamir. We became fast friends and spent the better part of two days with the two of them.  We had tours of both shipyards and then were treated to three hours at the location of their passion, a center for Downs, deaf or Autistic children. The downs children bake Empanadas which they sell to markets and earn money for their families. Tomas provided the warehouse and the necessary improvements for a bakery and rooms for learning. Also in the facility children from all backgrounds learn to play orchestra instruments and give concerts.  We attended a practice session and spoke with the instructors on one of their breaks.  About 200 children are active at the facility. The gifted teachers were a pure joy to meet and we could easily see their love for Tomas.

To top it off Tomas and Rocio joined us for dinner and visit on Roxia.  We made friends forever and confirmed again how close the Nordhavn family is.

After all the formalities of customs were complete we headed to San Diego and 8 hours later we were back in USA and then able to return to Mexico on our TIP for ten years.

A day in Brisbane

I thought we had a pretty cool ferry system in Washington until we started spending time in Australia. On our last trip in October Emmy and I spent a week in Sydney and spent a good bit of time on the water. Now after loading Roxia onto (into?) the good ship Yacht Express, Devin and I spent the day on the River in Brisbane riding ferries taking in the sites.

Roxia was celebrity of the day making the local Moreton Bay Cruisers Facebook Page as we were headed to meet Yacht Express.

I saw this sign on the ferry and thought it might be a good Nordhavn option.



Back in the USA

We finished our five week “working” adventure in Australia and have returned to the chilly Northwest.  We spent the first week getting Roxia set up then went on a three week shakedown cruise finishing with one more week in Sydney. Roxia is safe on the hard in Bundaberg Port Marina under the watchful eye of Brett Hensler and Donna Pressler. Roxia survived the first 100kph wind with no issues.  All the boats on the hard are kept in steel cradles and then the boat is strapped down.IMG_3615

We did have a few issues that we had to repair on the fly.  The worst of them was the hydraulic cooling pump connection failed and we didn’t have a spare.  We were three days from nowhere and needed the pump to be able to use the stabilizers.


These pictures show the sheared off teeth of the connection between hydraulic motor and water pump as well as the three versions of my solution. First, using cut up pieces of hose, zip ties (V1), then hose clamps (V2) and finally hose with hose clamps and a zip tie to take up some of the torsional force (V3). V1 lasted 20 minutes, V2 lasted 3 hours and finally V3 lasted more than two weeks. I need to come up with a better long term solution. If I can build a bracket to keep the motor and pump aligned the old style may work. The other problem is the pump has slotted head screws instead of hex head. That is the worst invention ever. It is impossible to hold a screwdriver in 115 degree heat in rough seas to change the impeller. At least that is a simple solution.

All in all this was a great trip. We did some cruising of the Whitsundays and the Curtis Coast (down to Bundaberg). Lady Musgrave is a reef about 35 nm off the coast. There is an opening in the reef deep enough to drive through. We cruised there for our last night before Bundy and we are glad we did.  After nervously motoring inside avoiding bommies, we anchored and took the dinghy to the tiny little island which is the part of the reef above water. We walked through mangroves with hundreds of nesting birds. The sound was amazing with all the songs and probably yelling at us to get out…  Back on the beach we snorkeled in the reef. A tortoise swam with us and we watched a Blue Spotted Ray rest under a rock.

Blue Spotted Ray

Here are some pictures from our cruising.


As we were cruising I was amazed at some of the patches of algae that we saw. I’m not sure if this is from the warm water or if it is normal for this area but the patches were vast.  Here is a picture when we were many miles offshore.


Large amounts of what appeared to be algae

Coal is a huge export from Australia. The controversy is starting to heat up regarding the use, mining and export of coal but these two pictures show the number of coal freighters we saw in both Mackay and Gladstone.


AIS and Radar split screen.


Visual approach to anchorage.

It was fun spending time in Sydney. The ferry service is awesome. With the Opal card you can take the public ferry, bus and train routes. There is a discount with the card and a 15.40 max per day use so once you hit that amount everything is free.  On Sundays the max is under $2!


Now the question is: Do we ship Roxia home or drive her home? The big question is if she is ready to make the voyage or can we get her ready before the required (by ATO) April 20 departure date.

Stay tuned.

A week in the Whitsundays

We had a great trip learning Roxia and systems.  We are starting to feel comfortable with systems and where to put things.  We are back in Mackay to provision for our trip south to Bundaberg to haul Roxia out for the Typhoon season.

We did some snorkeling complete with Stinger suits. Had a first chance to look at the hull of Roxia while snorkeling.  It is time for bottom paint but all looks well underneath.  We need kayaks or SUP’s for more water fun. We are starting a list of things we want now, not just things we need.

Here is an Item we came across which is one step to improving our use of plastic.  I would like to see this at more if not all marinas.


Pictures from Hamilton


Hamilton Island

We left Mackay, QLD on October 15 and headed to Scawfell Island.  We had SE winds 10-15k with wind waves on the starboard beam of 2-3 feet. Roxia handled the seas comfortably.  We had one issue with the generator running but not producing power. I checked all the manuals on the boat for the generator and all we had were the Northern Lights books for the engine. I had enough information to rebuild the engine but could I find a wiring diagram for the actual generator…not so lucky.  I grabbed the multimeter and headed to the engine room.  I was getting power at the generator so I knew it had to be between the genset and the panel.  After looking in the N62 manual I found there was a double pole breaker somewhere.  Back to the engine room and yes I found the box mounted on the bulkhead behind the gen and there was a tripped breaker. Boom, done, drop mic.  First issue at sea solved. We decided to continue the trip. Scawfell was really pretty so we put the dink “On the Rox” in the water to check things out. Yikes, gas gauge flashing empty and no paddle.  We circled Roxia and snapped some pictures then back on deck for the Dink.

October 16 found us at Goldsmith Island and a nice little sheltered cove on the North side. Two sail boats were already anchored but we were all separated and cozy.  I forgot to leave the inReach on so it looks like we transported there but we actually cruise there. It rained hard but it was warm so Roxia just got a nice wash down.  Anchoring is quite nice with the use of Flopper Stoppers to keep the rocking to a minimum. A 300# anchor and 1/2″ chain makes you sleep easy.  An item we never had on any other boat is the hydraulic automatic anchor wash down. Water sprays the chain at 180 gpm so as we haul it up it gets clean. It is so strong I thought it might blow off the galvanizing…maybe not.

October 17 we decided to head to the snazzy marina of Hamilton Island Marina.  A little pricy but very nice.  We did make the mistake of calling in for our slip assignment and proceeding in. Oops, here you wait for the concierge dinghy to come greet you and lead you to your slip. I had to back into a slip for the first time and managed to keep all 70 tons from crushing dock or human.  This marina was hit in March with a Category 5 Typhoon. The island, marina and resort were blasted.  People in the marina (150) all huddled in conference center to wait out the storm.  260-280kph winds remained for nearly 6 hours. The people were pinned in the building for two days. Food was running out then the steel doors caved in.  Everyone tried to stay in the large restrooms. We rode the free shuttle around the island and our driver was in that group.  There is a driving range where you hit balls into a pond.  The wind blew all the water out and sent 10,000 golf balls onto the runway.  Airplanes couldn’t take off or land until it was clear.  Resort staff walked the entire runway and cleaned it off so people could be evacuated. The owners of the resort hired 500-600 tradesmen to rebuild the resort. They are still working on projects seven months later but the resort and Island was only closed for 7 days!! No WiFi here! What?

Pictures will have to wait.

Everyone dies, not everyone really lives

Let the adventures begin!

Lone pilot 2